Spray Foam
Insulation for Homeowner / Builders / Home Remodeling
Conserve Energy!
Open Cell Spray Polyurethane Foam
Closed Cell Spray Polyurethane Foam
Attics
Other applications
JHMorrow Insulation helps you conserve energy today!
By designing and building a highly energy-efficient home, you
reduce your energy demands for heating and cooling. This
lowering your dependency on utility companies for the life of
your home. Saving energy also means saving your money!
JHMorrow Insulation provides the most energy–efficient,
environmentally friendly, closed cell and open cell
spray-in-place polyurethane insulation systems available. Our
product is manufactured and installed on site, and is formulated
from renewable agricultural resources. It is odorless and
completely non-toxic after installation. Spray polyurethane foam
stops airflow into and out of your home, reduces noise and
blocks other airborne pollutants from entering for a much more
comfortable and healthier environment.
Open- Cell Spray Polyurethane Foam
½ lb. Open-Cell SPF
½ lb. spray polyurethane foam insulation is an open-cell, two
component, low density, water-blown system specifically designed
for insulation applications. This technologically advanced,
economical insulation system provides improved occupant comfort,
a cleaner indoor environment, greater noise reduction and
superior energy savings over conventional insulation systems.
Unique Properties: ½ lb. spray
polyurethane foam insulation expands 120:1 from its original
liquid state, filling cracks, voids, crevices and building
cavities to provide a climate controlled building environment.
By mitigating airflow through and within walls (infiltration and
ex-filtration), heat and cold transfer (also called thermal
conductivity) moisture accumulation in the building materials
are reducing the chance for mold and mildew to accumulate,
populate grow It also minimizes the transfer of sound.
Stability: ½ lb. SPF will not
settle, shrink, or deteriorate, and it is guaranteed to retain
its R-value and noise-reduction qualities over the life of your
home.
Recommended Uses: ½ lb. insulation
may-be used for residential, commercial or industrial
structures. It can also be applied to the underside of roof
decks to form conditioned attic, or in non-vented crawl spaces
for greater energy savings. SPF is code supported, and
JHMorrow highly experienced licensed SPF
Contractor.
Green: (environmentally Friendly) ½
lb. SPF is a green insulation product developed from natural
resources, as well as a friendly blowing agent with zero Ozone
Depletion.
- SPF ½ lb. foam out performs fiber
glass batting insulation by 3-4 times.
- SPF ½ lb. foam makes an airtight
seal by expanding in place.
- SPF ½ lb. foam minimizes the
transfer of sound. (Noise reduction)
- SPF ½ lb. foam is the workhorse of
all spray foam products.
- SPF ½ lb. foam saves the
environment and your wallet.
- SPF ½ lb. foam allows applications
for unvented attic spaces.
- SPF ½ lb. foam is a partial airflow
barrier, reducing dust and pollen.
Maximum Comfort: When designing your
new home or renovating an existing one’s, it is important to
think about the value of comfort and quality. There are several
other insulation options, but only one that has the quality and
high performance efficiency for your home.
►Top
Closed-Cell Spray Polyurethane Foam
2 lb. SPF is a high density,
closed-cell spray polyurethane insulation. This two part liquid
system quickly expands to fill all gaps and voids. It then cures
to form a fully adhered, solid, monolithic insulation envelop.
The resulting insulation barrier offers many benefits that
standard fiberglass insulation cannot match nor obtain.
Efficiency: SPF 2 lb. foam’s R-value
is approximately R-6.8 per inch, compared to fiberglass batting
insulation which is about R-3.5. SPF’s ability to stop air
infiltration and eliminate convective looping saves the
homeowner (you) an estimated 40% on energy bills. SPF insulation
makes your house a more comfortable home for your family!
Structural Rigidity: SPF also adds
structural rigidity to your project. In a test conducted by the
National Association of Home Builders Research Center, it was
concluded that a 2” x 4” wall sprayed with polyurethane foam
insulation had two times the racking strength of a wall filled
with fiberglass batting insulation.
- SPF adds racking strength to walls.
- SPF is a vapor barrier when installed in all cavity’s.
- Your house becomes a conditioned living space through out.
- SPF will last the life of your home.
- SPF is custom fit into your home.
Green: Besides its dramatic energy
savings, SPF is formulated from renewable agricultural resources
and uses a state-of-the-art, environmentally friendly blowing
agent with zero ozone depletion potential (ODP). JHMorrow is
leading the way for owner-builders to build green homes!
Comfort:
The closed-cell, fully adhered structure of 2 lb.
SPF forms a lowpermeance air seal that blocks air infiltration,
noise pollution and water vapor movement. Often the need for
additional air barriers and vapor barriers is totally
eliminated. By controlling water vapor, condensation will not
occur, thus eliminating the moisture that supports mold growth.
Our manufacturers blend an anti-microbial component into the SPF
to additionally inhibit bacterial growth.
Call for an estimate today!
916-685-6374
►Top
Attics
 JHMorrow
Re-insulated a 80 year home in Davis California. The job took
three days and the outside temp ranged from 102 - 104 degrees.
The first day we removed all of the old insulation. The current
attic temp was 130 degrees while the house was 99 degrees
inside. The second day we installed SPF in the attic. The attic
was 125 degrees and inside was 95 degrees. The third day we
installed an ignition barrier. The temp outside was 104, while
the attic temp was only 89 degrees and the house was 90 degrees
with no air conditioner assistance.
It is estimated that 60% of home’s energy loss is out of its
attic space. The main reason for this is due to air flow. When
your attic is vented, it allows air flow into and out of your
home. Hot air rises and it goes up to your attic then and out.
With spray foam insulation we spray directly to your roof
decking as seen in our picture. By spraying the roof decking, we
make your attic space a non-vented conditioned living space.
This an save you from 20% to 40% in energy costs.
►Top
Other Types of Applications
JHMorrow specializes in many different types of SPF
applications.. We have a whole line of applications we can
install, including insulation for residential homes and
commercial buildings.
Vapor Barriers
 
Commercial Metal Buildings
When applied to metal building
it is vapor barrier AND insulation
- Only a few selected contractors in Northern California are
certified to install closed-cell SPF.
- SPF’s high R-value per inch allows more area to be insulated
in compact spaces.
- Closed-cell SPF provides a moisture barrier.
- Closed-cell SPF strengthens building structures and offers
added resistance to earthquake damage.
- Spray Polyurethane Foam (SPF) is more expensive on the front
end but more efficient in the long run.
►Top
General Construction
Residential and Commercial
JHMorrow has the experience and the knowledge to do the job
right. We come to the remodel or new structure and help create a
solution that is right for you. we are knowledgeable about
County, State and City local codes requirements.
We provide exact results with complete attention to detail.
Our installers are prompt, courteous, neat and clean. We clean
up our work area at the end of each day.
JHMorrow provides quality in SPF insulation
Dedicated to Excellence
For reliable, honest, timely and affordable Spray Foam
Insulation contractor services, contact JHMorrow today. You'll
be glad you did. See the work we can do for you!
With our
professional, experienced workmanship and
affordable
prices, you cannot go wrong with JHMorrow!
Call today! (916) 685-6374
JHMorrow Spray Foam Insulation
►Top
Spray Foam Locations - Northern California, including:
 Alameda
County
Amador
County
Butte
County
Calaveras
County
Colusa
County
Contra
Costa County
El
Dorado County
Lake
County
Marin
County |
Mendocino
County
Monterey
County
Napa
County
Nevada
County
Placer
County
Sacramento
County
San
Benito County
San
Joaquin County
San
Mateo County |
Santa
Cruz County
Shasta
County
Solano
County
Sonoma
County
Stanislaus
County
Sutter
County
Tehema
County
Yolo
County |
►Top
|
