JHMorrow Helping the General Contractor
By building a highly energy-efficient home, you reduce your
energy demands for heating and cooling. This lowers your clients
dependency on utility companies for the life of your home.
JHMorrow Insulation provides the most energy–efficient,
environmentally friendly, closed cell and open cell
spray-in-place polyurethane insulation systems available. Our
product is manufactured and formulated from renewable
agricultural resources. It is odorless and completely non-toxic
after installation. Spray polyurethane foam stops airflow into
and out of your project, reduces noise transference and blocks
other airborne pollutants from entering for a much more
comfortable and healthier environment.
Open- Cell Spray
Polyurethane Foam
Closed-Cell Spray
Polyurethane Foam
Attics
Other Spray Foam
Applications
General Construction
Open-Cell Spray Polyurethane Foam
½ lb. Open-Cell SPF
½ lb. spray polyurethane foam insulation is an open-cell, two
component, low density, water-blown system specifically designed
for insulation applications. This technologically advanced,
economical insulation system provides improved occupant comfort,
a cleaner indoor environment, greater noise reduction and
superior energy savings over conventional insulation systems.
Unique Properties: ½ lb. spray
polyurethane foam insulation expands 120:1 from its original
liquid state, filling cracks, voids, crevices and building
cavities to provide a climate controlled building environment.
By mitigating airflow through and within walls (infiltration and
ex-filtration), heat and cold transfer (also called thermal
conductivity) moisture accumulation in the building materials
are reducing the chance for mold and mildew to accumulate. It
also minimizes the transfer of sound.
Stability: ½ lb. SPF will not
settle, shrink, or deteriorate, and it is guaranteed to retain
its R-value and noise-reduction qualities over the life of your
home.
Recommended Uses: ½ lb. insulation
may-be used for residential, commercial or industrial
structures. It can also be applied to the underside of roof
decks to form conditioned or cathedralized attic areas, or in
non-vented crawl spaces for greater energy savings. SPF is code
supported, and JHMorrow is a highly experienced contractor.
Green: ½ lb. SPF (environmentally
friendly) is also a green insulation product developed from
natural resources, as well as a friendly blowing agent with zero
Ozone Depletion.
- SPF ½ lb. foam outperforms fiberglass
batting insulation by 3-4 times.
- SPF ½ lb. foam makes an airtight seal by
expanding in place.
- SPF ½ lb. foam minimizes the transfer of
sound (noise reduction).
- SPF ½ lb. foam is the workhorse of all
spray foam products.
- SPF ½ lb. foam allows unvented attic
applications.
Maximum Comfort: When designing your new home or renovating
an existing one, it is important to think about the value of
comfort and quality. There are several other insulation options,
but only one that has the quality and high performance
efficiency for your home JHMorrow insulation.
►Top
Closed-Cell Spray Polyurethane Foam
 2
lb. SPF is a high density, closed-cell spray polyurethane
insulation. This two part liquid system is sprayed in place and
quickly expands to fill all gaps and voids. It then cures to
form a fully adhered, solid, monolithic insulation envelop. The
resulting insulation barrier offers many benefits that standard
fiberglass insulation cannot match nor obtain.
Efficiency: SPF 2 lb. foam’s R-value
is approximately R-6.8 per inch, compared to fiberglass batting
insulation which is about R-3.5. SPF’s ability to stop air
infiltration and eliminate convective looping saves the
homeowner (you) an estimated 40% on energy bills. SPF insulation
makes your house a more comfortable home for your family!
 Structural
Rigidity: SPF also adds structural rigidity to your home. In a
test conducted by the National Association of Home Builders
Research Center, it was concluded that a 2 inches x 4 inches
wall sprayed with SPF had two times the racking strength of a
wall filled with fiberglass batting insulation.
- SPF closed cell adds racking strength to walls.
- SPF is a vapor barrier when installed in all cavities.
- Your house becomes a conditioned living space throughout.
- SPF will last the life of your project.
- SPF is custom fitted to your project.
Green Contractors: Besides its
dramatic energy savings, SPF is formulated from renewable
agricultural resources and uses a state-of-the-art,
environmentally friendly blowing agent with zero ozone depletion
potential (ODP). JHMorrow Insulation is leading the way for
green contractors.
 Comfort:
The closed-cell, fully adhered structure of 2 lb. SPF forms a
low permeance air seal that blocks air infiltration, noise
pollution and water vapor movement. Often the need for
additional air barriers and vapor barriers is totally
eliminated. By controlling water vapor, condensation will not
occur, thus eliminating the moisture that supports mold growth.
Our manufacturers blend an anti-microbial component into the SPF
to additionally inhibit bacterial growth.
Technical: 2.0 lb./cu. ft. density,
closed-cell SPF is a nominal insulation that provides higher
R-value per unit of thickness than can be achieved with standard
fiberglass insulation. (R-14 at 2 inches, nominal.) SPF is
produced from two specially formulated liquid components, which
are precisely measured, heated, and pumped through pressure
hoses into a mixing nozzle. The composite liquids are sprayed
onto the surfaces to be insulated where it reacts, expands and
cures to form a fully adhered, seamless, structural, solid
insulating blanket. Additionally, this has a Class-1 Fire
Rating.
Call for an estimate today!
916-685-6374
►Top
 Attics
It is estimated that 60% of home’s energy loss is out of its
attic space. The main reason for this is due to air flow. When
your attic is vented, it allows air flow into and out of your
home. Hot air rises and it goes up to your attic then and out.
With spray foam insulation we spray directly to your roof
decking as seen in our picture. By spraying the roof decking, we
make your attic space a non-vented conditioned living space.
This an save you from 20% to 40% in energy costs.
Other Types of Applications
JHMorrow Insulation specializes in many different types of
applications. including insulation for residential homes or
commercial buildings. We have a whole line of applications we
can install.
Vapor Barriers
 
Commercial Metal Buildings
When applied to metal building
it is vapor barrier AND insulation
Tanks - Storage tanks in the wine
industry, farming milk tanks, oil refining tanks and much more.
Industrial - commercial coolers,
freezers, processing plants, production facilities.
►Top
General Construction
Residential and Light Commercial
JHMorrow Company offers all general constructors spray foam
insulation services for both residential and commercial
facilities. We have the experience and the knowledge to do the
job right. We come to the remodel or new structure and assess a
solution that is right for you.
We are knowledgeable about county, state and city building
codes. We produce results with complete attention to detail. Our
installers are prompt, courteous, neat and clean. We clean up
our work area at the end of each day.
JHMorrow provides the following
services: spray foam insulation!
-
SPF’s high R-value per inch allows
more areas to be insulated in compact spaces.
-
Closed-cell SPF provides a moisture
barrier.
-
Closed-cell SPF strengthens building
structures and offers added resistance against earthquake
damage.
►Top
Spray Foam Locations - Northern California, including:
 Alameda
County
Amador
County
Butte
County
Calaveras
County
Colusa
County
Contra
Costa County
El
Dorado County
Lake
County
Marin
County |
Mendocino
County
Monterey
County
Napa
County
Nevada
County
Placer
County
Sacramento
County
San
Benito County
San
Joaquin County
San
Mateo County |
Santa
Cruz County
Shasta
County
Solano
County
Sonoma
County
Stanislaus
County
Sutter
County
Tehema
County
Yolo
County |
Dedicated to Excellence
With your needs and wants in mind,
JHMorrow has developed our company's
capabilities to better serve you! We are dedicated to providing
excellent service.
For reliable, honest and on-time SPF
contractor services that you can afford, contact
JHMorrow today. You'll be glad you did
once you see the work we can do for you!
With our
professional, experienced workmanship and affordable
prices, you
cannot go wrong with JHMorrow. Call today!
JHMorrow
Spray Foam Insulation
(916) 685-6374
►Top |
